OneBlade Travel Flexicase

OneBlade Travel Flexicase: black rigid body with a fluorescent yellow flexible TPU cover

Print Opens on MakerWorld

OneBlade Travel Flexicase is a 3D-printable case made to store and protect a Philips OneBlade razor and its accessories, from blades and combs to the charging cable. It has a rigid body and two flexible TPU covers, and is free to download on MakerWorld.

What it is

A rigid central body gives solid protection, while the dual side covers in flexible TPU snap securely into place, creating a dustproof and water-resistant seal. The interior is spacious enough for several attachments, with room for extra toiletries depending on your configuration. When the covers are closed they form a loop, so the case is easy to hang or attach to a backpack or toiletry bag.

  • Custom fit for the Philips OneBlade and its accessories, with room for extra toiletries.
  • Dustproof and water-resistant, depending on print quality: test it before exposing it to water.
  • Rigid shell and flexible TPU covers for good shock absorption.
  • Compact, for travel and outdoor use.
  • Loop closure for carrying or hanging, and an improved closing mechanism.

It is part of the Flexicase series: modular, durable cases designed to adapt to your lifestyle.

Photos

OneBlade Flexicase with the flexible yellow TPU cover opened, showing the razor inside
Close-up of the textured black rigid body of the Flexicase
Open Flexicase with the razor inside and the flat yellow TPU cover beside it
Translucent yellow TPU cover of the Flexicase, seen from the front
Hand lifting the yellow TPU cover to open the case
Close-up of the closed Flexicase: textured black body and yellow TPU cover
Closed OneBlade Flexicase standing upright, side view

Printing

Profile Time Filament
OneBlade Flexicase 4.6 h 104 g PLA and TPU

The time and weight are those shown on MakerWorld and vary with printer and settings.

  • Print the rigid body in a durable material such as PLA+ or PETG.
  • Print the flexible covers in TPU 95A or softer for the best fit and sealing; TPU for AMS works too.
  • No supports are needed.

In the photos: eSun TPU 95A transparent yellow and Bambu Lab PLA matte black, printed on the textured plate.

Frequently asked questions

Which razor does it fit?

The Philips OneBlade and its accessories.

Is it waterproof?

It is dustproof and water-resistant, depending on print quality. Test it before exposing it to water.

What materials should I use?

PLA+ or PETG for the rigid body, TPU 95A or softer for the covers.

Where can I download the model?

For free on MakerWorld, using the Print button on this page.

When was it published?

On 5 August 2025.

Print Opens on MakerWorld