Flags for Benchy is a set of mini flags designed to fit the flagpole hole of the classic Benchy 3D-printing test boat. They print in two coloured layers with a solid intermediate layer for strength, need no supports and are free to download on MakerWorld.
What it is
Yes, the Benchy has a perfectly working flagpole hole. These flags are made for it: lightweight, durable and quick to print. Swap them depending on the season, event or mood, and give every Benchy its own character. For extra realism, curve the flag with a lighter and the help of a pencil.
- Sized to fit the Benchy flagpole hole.
- A reinforcing monochromatic middle layer.
- Fast to print, with minimal filament use and few filament changes.
- Support-free and beginner-friendly.
- Customizable: the set has the most common colour layouts, so you can choose a layout and switch the colours to the ones you need.
Photos
Included flag layouts
The layouts are listed from left to right, top to bottom.
Three vertical stripes
Belgium (black, yellow, red); Chad (blue, yellow, red); France (blue, white, red); Gabon (green, yellow, blue); Guinea (red, yellow, green); Ireland (green, white, orange); Italy (green, white, red); India without emblem (saffron, white, green); Ivory Coast (orange, white, green); Mali (green, yellow, red); Mexico without emblem (green, white, red); Nigeria (green, white, green); Romania (blue, yellow, red).
Three horizontal stripes
Armenia (red, blue, orange); Austria (red, white, red); Estonia (blue, black, white); Germany (black, red, yellow); Hungary (red, white, green); Latvia (carmine red, white, carmine red); Lithuania (yellow, green, red); Netherlands (red, white, blue); Russia (white, blue, red); Serbia without emblem (red, blue, white); Yemen (red, white, black).
Three horizontal stripes and a triangle
Palestine and Sudan.
Two horizontal stripes
Indonesia (red, white); Monaco (red, white); Poland (white, red); Ukraine (blue, yellow).
Scandinavian cross
Denmark (red with a white cross); Finland (white with a blue cross); Sweden (blue with a yellow cross).
Printing
| Profile | Time | Filament |
|---|---|---|
| Complete set, 4 styles (AMS) | 0.6 h | 10 g PLA, multicolour |
The time and weight are those shown on MakerWorld and vary with printer and settings.
Frequently asked questions
Which Benchy do these fit?
The classic Benchy, through its flagpole hole.
Can I print a flag that is not in the list?
The set covers the most common layouts: pick the nearest layout and change the filament colours to match the flag you need.
Do the flags need supports?
No, they are support-free.
Where can I download the model?
For free on MakerWorld, using the Print button on this page.
When was it published?
On 17 September 2025.