Game of Thrones Signet Rings

Two Targaryen rings with a three-headed dragon, one red on a black band and one gold on black, on a wooden tray

Print Opens on MakerWorld

A series of signet rings inspired by the houses of Game of Thrones, to 3D-print at home. Each one carries the raised emblem of its house on a textured band, with the colours already planned in the file so that only a few filament changes are needed. They are made for a 0.2 mm nozzle and scaled for a common ring size, which you can adjust. The Blackfyre ring, marked with a crown, is a premium design for Patreon supporters.

Lannister

Gold signet ring with a raised lion on a red field, resting on grey fabric
Side of the gold Lannister ring, with a band of patterned relief, on a white finger form

A signet ring inspired by Game of Thrones for House Lannister, with the raised emblem of the lion on a red field.

Designed for a 0.2 mm nozzle. The ring is already scaled to 117.2%, the most common men’s size (ISO 62, US 10); scale it back to 100% for ISO 54 (US 6¾), the most common women’s size, or use the size chart on MakerWorld.

Print on MakerWorld All rings

Tyrell

Close-up of the Tyrell ring: a raised golden rose on a green field
The Tyrell ring in profile, with a gold rose, a green edge and a split band
The Tyrell ring on a white finger form, seen at an angle, with a split band
Three-quarter view of the Tyrell ring on a grey surface

A signet ring inspired by Game of Thrones for House Tyrell, with the raised emblem of the Tyrell rose. The colour changes sit on separate layers and are programmed, not painted, so the preview on MakerWorld is monochrome.

Designed for a 0.2 mm nozzle. The ring is already scaled to 117.2% (ISO 62, US 10); scale it back to 100% for ISO 54 (US 6¾), or use the size chart on MakerWorld.

Print on MakerWorld All rings

Targaryen

Two Targaryen rings with a three-headed dragon, one red on a black band and one gold on black, on a wooden tray
Gold Targaryen ring with a black dragon, next to a black textured ring, on a white finger form
Targaryen ring with a black dragon on gold, next to a black ring with a scaled band
Close-up of the red three-headed dragon on a black ring, on a wooden background

A signet ring inspired by Game of Thrones for House Targaryen, with a detailed texture and a relief of the three-headed dragon. It is already coloured and needs just one filament change.

It works best with a 0.2 mm nozzle. The ring is already scaled to 116% (ISO 62, US 10); scale it back to 100% for ISO 54 (US 6¾), or use the size chart on MakerWorld.

Print on MakerWorld All rings

Stark

Black Stark ring with a silver direwolf head, seen from the front on white fur
The Stark ring seen from the side, showing the silver wolf relief and the textured black band
Two Stark ring tops side by side, printed with a 0.4 and a 0.2 nozzle
The Stark ring on a white finger form, with a silver direwolf on a gold-coloured plate and a black band

A signet ring inspired by Game of Thrones for House Stark, with a detailed texture and a relief of the direwolf. It is already coloured for a minimal number of filament changes.

It works best with a 0.2 mm nozzle; the photo compares a 0.4 and a 0.2 nozzle. The ring is already scaled to 116% (ISO 62, US 10); scale it back to 100% for ISO 54 (US 6¾), or use the size chart on MakerWorld.

Print on MakerWorld All rings

Blackfyre

Front view of the Blackfyre ring: a red disc with a black three-headed dragon in relief, on a black band, on a white finger form
Side view of the Blackfyre ring, showing the faceted dragon-scale band and the red edge of the disc, on a white finger form
Black ring with a faceted, scaled band and a red disc carrying a black three-headed dragon, on a white finger form

A signet ring inspired by the House Blackfyre story from Game of Thrones, with a dragon-scale surface texture and a raised Targaryen symbol. It comes as a Bambu Lab 3MF with a shape modifier and a second colour already applied.

Designed for a 0.2 mm nozzle. The ring is scaled to 117.2%, which fits ISO 62 (US 10, 20.16 mm inside diameter); set the scale back to 100% for ISO 54 (US 6¾, 17.2 mm). A size chart is included.

Premium: the STL and 3MF files are for Patreon supporters on any paid tier.

Get the files All rings

Print Opens on MakerWorld